Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX9400W - Asia - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX9400W - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
NORYL GTX™ 9400W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits high heat resistance, high flow, and added mold release. NORYL GTX9400W resin is injection moldable and an excellent candidate for automotive under-the-hood applications such as power distribution boxes, relay boxes, connectors, sensors, and fuse box covers.

UL Yellow Card Link E207780-615350
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 97 g/10min ASTM D 1238
温度 280 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 69 MPa ISO 527
断裂伸长率 39 % ISO 527
弯曲模量 2700 MPa ISO 178
悬臂梁缺口冲击强度, +23°C, 4mm 21 kJ/m² ISO 180/1A
ASTM数据
拉伸模量 1950 MPa ASTM D 638
屈服应力 64 MPa ASTM D 638
断裂拉伸强度 62 MPa ASTM D 638
屈服伸长率 11 % ASTM D 638
断裂伸长率 40 % ASTM D 638
悬臂梁缺口冲击强度, 1/8 in 256 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 112 J/m ASTM D 256
温度 -30 °C -
Izod冲击强度, 1/8 in 849 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 78 °C ISO 75-1/-2
热变形温度, 0.45 MPa 187 °C ISO 75-1/-2
维卡软化温度, B 203 °C ISO 306
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
ASTM数据
DTUL @ 66 psi 190 °C ASTM D 648
DTUL @ 264 psi 83 °C ASTM D 648
维卡温度 212 °C ASTM D 1525
其它性能价值单位Test Standard
密度 1100 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 95 - 105 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.07 % -
注塑熔体温度 270 - 295 °C -
模具温度 65 - 95 °C -
1区 255 - 295 °C -
2区 260 - 295 °C -
3区 265 - 295 °C -
螺杆转速 20 - 100 rpm -
背压 0.3 - 1.4 MPa -
典型数据
加工方法
注塑
应用
汽车
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.